Home >B2000 Series Chassis

B2000 Series 5U 5U x 26.4 inch depth design Four 5-1/4 inch front drive bays One 3-1/2 inch front drive bay Front accessible redundant power Four hot swap cooling fans Thermal management card 20-Slot passive backplane Twenty I/O card slots Various power options Custom paint and logo available

Additional Photos

The B2000 Series chassis is a high performance design in a low cost 5U rackmount enclosure. Feature rich, the B2000 Series is a solid, robust design which will meet the most rigorous and demanding requirements. This chassis is ideal for I/O intensive applications such as telephony, data acquisition, Digital Video Recording (DVR), high density web server, back office server, firewall, proxy server and VPN gateway applications including collocation. The enclosure is constructed of 18 gauge steel, clear zinc plated for corrosion protection and an attractive appearance. The front panel is attractively detailed and is of heavier gauge than the chassis. There is a huge amount of drive space with the four front accessible 5-1/4" drive bays. This allows for a low cost RAID implementation using SCSI or ATA drives. One external 3.5 inch drive is also available.

A door covers and protects the drives. Accessible behind the door is the power and reset switches as well as the power-on and drive activity LED's. The LED's are visible through the door when it is closed. Cooling is provided by four fans 90mm 51CFM hot swap fans. Alternatively, three 120mm 90CFM fans can be installed. The fans provide tach signals for failure detection by the motherboard. The B2000 Chassis provides for mounting a 20-slot passive backplane. A wide variety of backplanes are available offering different mixes of ISA and PCI slots. Depending on the CPU selection, up to 19 plug-in cards can be installed. Power is provided by dual full-sized front accessible redundant supplies. Front accessibility of the power and drives means very low MTTR in the event of a component failure.

Downloadable PDF files

B2000 Datasheet

B2000 Drawing

Highlights

Dimensions

19" (wide) x 5U (8.65") (high) x 26.4" (deep)

Drive Capacity

Five 5-1/4 inch drives - front accessible
One 3-1/2 inch drive - front accessible

Front Panel Controls

Power switch - Black momentary rocker with 2 position .100 header for board connection
Reset switch - Four pushbuttons with 2 position .100 header for board connection*
Power LED - Green with 3 position .100 header for board connection
Drive Activity - Red with 2 position .100 header for board connection

Switch and LED connectors are labeled at the connector end.

* Note: Four reset switches are provided for use with up to a 4 section segmented backplane.

Rear Panel Details

20 Plug-in card slot
Two DB9 connector knockouts

Cooling

Four 90mm 51CFM fans with tach signal
Positive chassis pressure
-- or--
Three 120mm 90CFM fans with tach signal

Power Supply

Not included.
Front mounted redundant to 600 Watts
AC Input - Zippy ARI or RHI form factor.
Optional 12, 24 or 48VDC supplies available

Passive Backplane

20-Slot ISA/PCI accommodated

Available backplanes:
BP20ISA - 20 ISA slots
BP20ISA13PCI4 - 3 CPU, 13 ISA, 4 PCI
BP20ISAS4 - 20 ISA slots, Split 4 x 5
BP20S4 - Split 4x 2 CPU, 3 PCI

Plug-in I/O Cards

Depending on configuration, accommodates up to 19 plug-in I/O cards

Integration Services Chassis Plans is more than a chassis supplier. We offer a complete product line including the latest motherboards, drives, video boards and plug-in cards including analog/digital I/O cards. Integrating today's complex systems can be a challenge. Allow us to provide you with a professionally integrated system with the OS loaded and the system tested and burned-in as a complete unit. We stand behind our work 100%.