The E2 Series chassis is a medium performance
design in a low cost 2U rackmount enclosure.
Feature rich, the E2 Series is a solid,
robust design which will meet the most
rigorous and demanding requirements.
This chassis is ideal for high density
I/O intensive applications.
The enclosure
is constructed of 18 gauge steel, clear
zinc plated for corrosion protection
and an attractive appearance. The front
panel is attractively detailed and is
of heavier gauge than the chassis.
The E2 provides
for one externally accessible 5-1/4
inch and one 3-1/2 inch drive bays.
In addition, three 3-1/2 inch drives
can be installed internally.
The chassis is
cooled by one 80mm 42CFM and one 60mm
17CFM ball bearing fans. Air flow is
in through a front mounted air filter
and the chassis provides for negative
air pressure.
A door covers and
protects the drives. Accessible behind
the door is the power and reset switches
as well as the power-on and drive activity
LED's. The LED's are visible through
the door when it is closed.
The E2 Chassis
provides for mounting a standard ATX
motherboard up to 9.6 x 12-inches. Two
plug-in cards can be installed using
the included riser card. Additionally,
several riser card options are available.
One 5-1/4 inch drive - front accessible
One 3-1/2 inch drive - front accessible
Three 3-1/2 inch drives -internal
Front Panel Controls
Power
switch - Black momentary pushbutton with 2
position .100 header for board connection
Reset switch - Black momentary pushbutton
with 2 position .100 header for board connection
Power LED - green with 3 position .100 header
for board connection
Drive Activity - Red with 2 position .100
header for board connection
Switch
and LED connectors are labeled at the connector
end
Rear Panel Details
2 Plug-in card slots
ATX I/O Shield
Cooling
One 80mm
42CFM fan and one 60mm 17CFM fan
Negative chassis pressure
Optional fan tachometer output
Power Supply
Not included.
Accepts special PS/2 style supply with remote
AC input
Optional 12, 24 or 48VDC supplies available
Motherboard Mounting
Standard 9.6 x 12 inch ATX motherboard
Motherboard adapter plate accommodates any
motherboard
Plug-in I/O Cards
Accommodates
two plug-in I/O cards
Cards limited to 9.6 inches long
Includes 2-slot 32-bit standard 5V PCI riser
card
Integration
Services
Chassis Plans is more than a chassis
supplier. We offer a complete product
line including the latest motherboards,
drives, video boards and plug-in cards
including analog/digital I/O cards.
Integrating today's complex systems
can be a challenge. Allow us to provide
you with a professionally integrated
system with the OS loaded and the system
tested and burned-in as a complete unit.
We stand behind our work 100%.
