The F1 Series chassis is a high performance
design in a low cost 1U rackmount enclosure.
Feature rich, the F1 Series is a solid,
robust design which will meet the most
rigorous and demanding requirements.
This chassis is ideal for high density
server applications including collocation.
The enclosure
is constructed of 18 gauge steel, clear
zinc plated for corrosion protection
and an attractive appearance. The front
panel is attractively detailed and is
of heavier gauge than the chassis.
There is more than
ample drive storage. Two drives configurations
are possible. One configuration allows
one external 5.25 inch drive, external
3.5 inch drive and two internal 3.5
inch drives.
The other configuration
allows for two external 5.25 inch drives
and one external 3.5 inch drive. The
externally accessible drives are ideally
suited for removable drive carriers.
A door covers and
protects the drives. Accessible behind
the door is the power and reset switches
as well as the power-on and drive activity
LED's. The LED's are visible through
the door when it is closed.
Cooling is provided
by five fans, three of which provide
cooling air and 2 exhaust fans.
The F1 Chassis
provides for mounting a standard EATX
motherboard up to 12 x 13-inches. One
plug-in card can be installed using
the included riser card.
19" (wide)
x 1U (1.7") (high) x 23.6(deep)
Weight - 25 lbs / 11 kgs
Drive Capacity
One 5-1/4 inch drive - front accessible
One 3-1/2 inch drive - front accessible
Two 3-1/2 inch drives -internal
- or -
Two 5-1/4 inch drives - front accessible
One 3-1/2 inch drive - front accessible
Front Panel Controls
Power
switch - Black momentary pushbutton with 2
position .100 header for board connection
Reset switch - Black momentary pushbutton
with 2 position .100 header for board connection
Power LED - green with 3 position .100 header
for board connection
Drive Activity - Red with 2 position .100
header for board connection
Switch
and LED connectors are labeled at the connector
end.
Rear Panel Details
1 Plug-in card slot
ATX I/O Shield
Cooling
Five 40mm
8.9CFM fans with tach signal
Three fans mounted mid-chassis
Two exhaust fans
Power Supply
Not included.
AC Input - Zippy P1G form factor.
Optional 12, 24 or 48VDC supplies available
Motherboard Mounting
Standard 12 x 13 inch EATX motherboard
Motherboard adapter plate accommodates any
motherboard
Plug-in I/O Cards
Accommodates
one plug-in I/O card
Includes 32-bit standard 5V PCI riser card
Integration
Services
Chassis Plans is more than a chassis
supplier. We offer a complete product
line including the latest motherboards,
drives, video boards and plug-in cards
including analog/digital I/O cards.
Integrating today's complex systems
can be a challenge. Allow us to provide
you with a professionally integrated
system with the OS loaded and the system
tested and burned-in as a complete unit.
We stand behind our work 100%.
