|
ISA SLOTS
Provides two ISA Bus slots for the
use of standard ISA Bus option cards.
PCI LOCAL BUS SLOTS
Provides 16 PCI Local Bus slots. All
PCI Slots are 33 MHz, and support 64 bit and 32 bit
Standard PCI Local Bus option cards.
CPU SLOT
Accepts a PCI Industrial Computer
Manufacturers Group (PICMG) 2.0 compliant processor.
PRINTED CIRCUIT LAYERS
The backplane is a six-layer .062"
thick board. Three signal layers, +5 voltage layer,
+3.3 voltage layer and ground layer. Multi-layer construction
provides excellent noise immunity.
POWER CONNECTORS
The standard AT power connection is
available through two 12-pin .156 MTA connectors or
one terminal block connector. Power connection for +3.3V
is available through a 12-pin .156 MTA connector or
an ATX connector (optional).
|
AUXILIARY POWER CONNECTOR
Additional power capacity is available
through two 6-pin .156 MTA connectors.
POWER INDICATORS
The power indicators provide a convenient
visual check for +5V, -5V, +12V, -12V and +3.3V power
connections.
PCI-TO-PCI BRIDGE
The PCI-to-PCI bridge supports the
PCI 2.1 specification. This bridge allows PCI Local
Buses to extend the electrical loading limits of a single
PCI Bus and to operate independently, allowing for communication
within the same bus even if the other PCI Buses are
busy. The BP3/16-64 backplane has bus mastering capabilities
on all 16 PCI Local Bus slots.
64-BIT BACKPLANE
Provides 64-bit PCI Local Bus slots
for the use of 33MHz PCI Local Bus option cards. The
64-bit feature is available on this model.
|
