|
ISA BUS SLOTS
Provides two ISA Bus slots for the use
of standard ISA Bus option cards.
PCI LOCAL BUS SLOTS
Provides ten PCI Local Bus slots for the use of standard PCI Local
Bus option cards.
SBC SLOT
Accepts a PICMG® 1.0 compliant
processor.
PRINTED CIRCUIT LAYERS
The backplane is a six-layer, .062”
thick board with three separate signal layers: +5V,
+3.3V and ground. Multi-layer backplane construction
provides excellent noise immunity.
POWER INDICATORS
The power indicators provide a convenient
visual check for +5V, -5V, +12V, -12V and +3.3V power
connections.
|
POWER CONNECTORS
The standard AT power connection is
available through a 12-pin .156 MTA connector. Power
connection for +3.3V is available through a 12-pin .156
MTA connector or an ATX connector (optional).
AUXILIARY POWER CONNECTOR
Additional power capacity is available through a 6-pin .156 MTA
connector.
PCI-TO-PCI BRIDGE
The PCI-to-PCI bridge supports the PCI
Local Bus 2.1 specification. This bridge allows the
PCI Local Buses to extend the electrical loading limits
of a single PCI Bus and to operate independently, allowing
for communication within the same bus even if the other
PCI Buses are busy. The BP3/6/4 backplane has bus mastering
capabilities on all ten PCI Local Bus slots.
|
PCB thickness .062"
